Engine Mount Cross Reference
IMPORTANT NOTICE
Suggested mounts are based on past applications with four point mounting configurations. Since engines, marine gears, engine mounted accessory weights, horsepower, and installations are variable, it is important to make certain that total package installed weights do not exceed mount capacities.
*Suggested Mounts are based on actual applications - make sure to compare the listed mount weight capacities against your actual combined engine, gear, and other engine mounted accessory weights. Do not exceed listed four (4) point mounting capacities.
Engine Model / Mount Cross Reference / 4 Point Mountings
Engine Model | |||||
|---|---|---|---|---|---|
Stern Drive Installations | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| All 4 and 6 Cylinder and V8 GAS Engines | 500-1200 | 80-500+ | DF-216 | 4.0" | 3/4" - 16 |
| Where Additional Clearance is Desired | 500-1200 | 80-500+ | DF-216 B2 | 4.25" | 3/4" - 16 |
| All 4 and 6 Cylinder and V8 GAS Engines | up to 800 | 80-375 | Use DF-206 for 5/8" stud | 4.0" | 5/8" - 18 |
Inboard Installations | |||||
| Gas Inboard Rear Mount (Transmission End) | 500-1200 | 80-500+ | RM-1060 | 4.0" | 3/4" - 16 |
Caterpillar Diesel Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| 3116 / 3126 / C7 / C9 | 1500-2400 | 205-500 | DF-9106 | 5.0" | 1" - 14 |
| 3208/3304B | 1700-2200 | 85 up to 340 | DF-238-M1 | 5.0" | 3/4" - 16 |
| 3208 | 1700-2600 | >340 | DF-4408-4 | 5.0" | 1" - 14 |
| 3308C / 3406E / 3176B / 3306C | 1600-3800 | 500-820 | DF-4407-4 Light End | 5.0" | 1" - 14 |
| DF-4428-4 Heavy End | 9.0" | 1" - 14 @ 2 | |||
Chris-Craft Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| 181-F | 650 | 130 | DF-2207-2 | 4.0" | 5/8" - 18 |
| 305-F / 350K / 350KBM | 500-1200 | 250-330 | DF-216 | 4.0" | 3/4" - 16 |
| Up to 800 | 250-330 | Use DF-206 for 5/8" stud | 4.0" | 5/8" - 18 | |
| All 454 engines | 1200 | 330-425 | DF-216 | 4.0" | 3/4" - 16 |
Cummins Diesel Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| 4BT/6BT | 900-1600 | 80-370 | DF-477-M3 | 5.0" | 3/4" - 16 |
| 6C/420 Diamond | 1800-2300 | 150-450 | DF-9106 | 5.0" | 1" - 14 |
| V-504 / 555-M | 1800-2200 | 200-250 | DF-238-M1 | 5.0" | 3/4" - 16 |
| VT-555-M | 2200-2500 | 270 | DF-4407-4 | 5.0" | 1" - 14 |
| V-903-M | 2800 | 305-360 | DF-4408-4 | 5.0" | 1" - 14 |
| NTA855, QSM 11 Engines | 2800-4200 | 215-635 | DF-4408-4 Light End | 5.0" | 1" - 14 |
| DF-4428-4 Heavy End | 9.0" | 1" - 14 @ 2 | |||
Detroit Diesel Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| 6.2 / 4-53 / 8.2 / 6V5 / 6V53T / 471N | 700-2400 | 130-420 | DF-238-M1 | 5.0" | 3/4" - 16 |
| 471TI / 6-71 / 6-71TI / 6V71 / 6V71TA | 2200-2800 | 250-550 | DF-4408-4 | 5.0" | 1" - 14 |
| 8V71 / 8V71TI / 6V92 / 6V92TA / 8V92 / 8V92TA | 3500-4200 | 650-720 | DF-4408-4 Light End | 5.0" | 1" - 14 |
| DF-4428-4 Heavy End | 9.0" | 1" - 14 @ 2 | |||
Duetz Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| F1L208 / F1L20 / F1L511 / F2L511 | 190-425 | 13-28 | DF-2205-2 | 4.0" | 5/8" - 18 |
| F2L912 / F3L912 / F4L / 912 / F5L912 | 600-1200 | 36-200 | DF-216 | 4.0" | 3/4" - 16 |
| F6L912/BF6L913 | Up to 800 | 36-200 | Use DF-206 for 5/8" stud | 4.0" | 5/8" - 18 |
| V-6 & V-8 Engines | 1250-2800 | 210-500 | DF-4408-4 | 5.0" | 1" - 14 |
| V-6 & V-8 Engines | 3400-4200 | 520-600 | DF-4408-4 Light End | 5.0" | 1" - 14 |
| DF-4428-4 Heavy End | 9.0" | 1" - 14 @ 2 | |||
Ford Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| LSG/CSG/WSG (Gas engines) | 200-480 | 120-245 | DF-206 | 4.0" | 5/8" - 18 |
| YSD-424 / YSD-635 / SSD437 / DSD-442 (Gas engines) | 500-800 | 250-325 | DF-216 | 4.0" | 3/4" - 16 |
| SSD655N / 655T / DSD659 / DSD659 / 660 / 662 (Gas engines) | 950-1500 | 300-480 | DF-236-M1 | 5.0" | 3/4" - 16 |
| DSD-681N/T (Gas engines) | 1500-1600 | 500 | DF-237-M1 | 5.0" | 3/4" - 16 |
| Lehman & Merlin Diesel | 2800 | 300-475 | DF-4408-4 | 5.0" | 3/4" - 16 |
| Ford Gas Generators VSG411 / 413/ LSG423 | 200-450 | 20-75 | DF-2205-2 | 4.0" | 5/8" - 18 |
| LSG875/CSG649 | 470-725 | 80-200 | DF-2207-2 | 4.0" | 5/8" - 18 |
| Ford Diesel Engines & Gen ESD442 Marine | 290 | 80-100 | DF-2205-2 | 4.0" | 5/8" - 18 |
| All other ESD / BSD Series Engines | 800-1400 | 150-300 | DF-236-M1 | 5.0" | 3/4" - 16 |
Isuzu Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| QD27 | 400-500 | 14-28 | DF-2207-2 | 4.0" | 5/8" - 18 |
| QD40/60 | 500-750 | 40-60 | DF-3304-3 | 4.5" | 3/4" - 16 |
| QSD130 / 145 | 1100-1400 | 130-145 | DF-3306-3 | 4.5" | 3/4" - 16 |
Iveco Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| 8041SRM15/8061M05 | 900-1500 | 140-150 | DF-236-M1 | 5.0" | 3/4" - 16 |
| 8061SM05 / 06 / 8061SRM 05 & 06 & 27 | 1160-1800 | 190-270 | DF-237-M1 | 5.0" | 3/4" - 16 |
| 8361SRM10 & 37 | 1500-1800 | 285-420 | DF-4407-4 | 5.0" | 1" - 14 |
| 8281SRM70 | 3700-4200 | 500-700 | DF-4408-4 Light End | 5.0" | 1" - 14 |
| DF-4428-4 Heavy End | 9.0" | 1" - 14 @ 2 | |||
John Deere Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| 3.9 Liter & 4.5 Liter | 1000-1200 | 70-150 | DF-236-M1 | 5.0" | 3/4" - 16 |
| 6.8 Liter | 1500-1800 | 155-230 | DF-237-M1 | 5.0" | 3/4" - 16 |
| 7.6 & 8.1 Liter | 1800-2200 | 240-450 | DF-238-M1 | 5.0" | 3/4" - 16 |
| 9.0 Liter | 2350 | 325-500 | DF-4408-4 | 5.0" | 1" - 14 |
| 12.5 Liter | 2500-2800 | 240-450 | DF-4408-4 | 5.0" | 1" - 14 |
Peninsular Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| All Models | 500-2000 | 110-450 | DF-238-M1 | 5.0" | 3/4" - 16 |
Perkins Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| M20/M30 | 240-300 | 17-50 | DF-2205-2 | 4.0" | 5/8" - 18 |
| M35 - M90NA | 450-650 | 33.5-80 | DF-2207-2 | 4.0" | 5/8" - 18 |
| 4-108M/4-154M | 465-700 | 50-60 | DF-2207-2 | 4.0" | 5/8" - 18 |
| M135/ 165T/ 200TI / 240TI/ 275TI / 4-236M | 840-1500 | 85-250 | DF-236-M1 | 5.0" | 3/4" - 16 |
| T6-3544M / ST6-3544M / SSTT6-3544M | 1250-2100 | 135-200 | DF-4406-4 | 5.0" | 1" - 14 |
| TV8-540M | 2200-2500 | 350 | DF-4407-4 | 5.0" | 1" - 14 |
Renault Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| RC8D / 11D / 12D / 16D | 180-450 | 0-20 | DF-2205-2 | 4.0" | 5/8"- 18 |
| RC30D | 500-700 | 30-50 | DF-2207-2 | 4.0" | 5/8"- 18 |
| RC55D / 80D / 90D / RC130DTS & 140 | 750-1400 | 55-160 | DF-236-M1 | 5.0" | 3/4" - 16 |
Universal Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| Model 12, 18, 20, 25, 25XP, 30 | 175-450 | 0-35 | DF-2205-2 | 4.0" | 5/8"- 18 |
| Model 40, 50 | 490-700 | 40-50 | DF-2207-2 | 4.0" | 5/8"- 18 |
| M3-20/M4-30 | 235-450 | 18-25 | DF-2205-2 | 4.0" | 5/8"- 18 |
| 5444/M4-44 & 50 | 480-550 | 45-60 | DF-206 | 4.0" | 5/8"- 18 |
| ATOMIC 1 | 130 | 10 | DF-2204-2 | 4.0" | 5/8"- 18 |
| ATOMIC 2/ ATOMIC 4/ STEVEDORE (Includes model 5411, 5416, 5424) | 175-335 | 0-30 | DF-2205-2 | 4.0" | 5/8"- 18 |
| ATOMIC Model 5432 | 490 | 30-40 | DF-2207-2 | 4.0" | 5/8"- 18 |
Volvo Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| MD5A/6B/7A | 245-385 | 7.5-13 | DF-2205-2 | 4.0" | 5/8"- 18 |
| MD11C / 17C / MD17C-110S / MD21A | 500-750 | 23-61 | DF-2207-2 | 4.0" | 5/8"- 18 |
| TMD31 / TAMD31 / MD32A | 740-900 | 62-150 | DF-3304-3 | 4.5" | 3/4"- 16 |
| TMD40A / TMD40A / TMD41 / TAMD41 | 1000-1100 | 117-200 | DF-3306-3 | 4.5" | 3/4"- 16 |
| TAMD60A / 61 / MD70B / TAMD70B / C | 1800-2200 | 150-310 | DF-236-M1 | 5.0" | 3/4"- 16 |
| TAMD42 / THAMD70C / TAMD71 / MD70E | 2000-2400 | 200-430 | DF-4407-4 | 5.0" | 1" - 14 |
| TMD120A / TAMD120A / TAMD122 | 2200-4200 | 260-450 | DF-4408-4 Light End | 5.0" | 1" - 14 |
| DF-4428-4 Heavy End | 9.0" | 1" - 14 @ 2 | |||
Westerbeke | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| W-10, W13, W18,W21,W21A,W27 | 200-450 | 0-27 | DF-2205-2 | 4.0" | 5/8" - 18 |
| W33, W46, W52, W58, W70 | 500-750 | 33-70 | DF-2207-2 | 4.0" | 5/8" - 18 |
| W80, W100, W120 | 800-1400 | 80-120 | DF-236-M1 | 5.0" | 3/4" - 16 |
Yanmar Engines | Weight lbs | HP Range | Suggested Mount* | Hole Centers | Stud Size |
| GM Series | 100-320 | 9-28 | DF-2205-2 | 4.0" | 5/8" - 18 |
| 3JH Series | 390-425 | 35-50 | DF-2205-2 | 4.0" | 5/8" - 18 |
| 4JH Series | 490-550 | 50-100 | DF-2207-2 | 4.0" | 5/8" - 18 |
| 4LH Series | 750-900 | 110-170 | DF-3304-3 | 4.5" | 3/4" - 16 |
| 6LP Series | 700-900 | 260-315 | RM-1060 | 4.0" | 3/4" - 16 |
| 6LYA-CX Series | 1300-1500 | 315-465 | DF-9106 | 5.0" | 1" - 14 |
| 6CX- GTE2 Series | 1800-2400 | 490-500 | DF-9106 | 5.0" | 1" - 14 |
Note 1: DF2200 Series Mounts available as DF2200 - 2 (with 5/8" stud) or DF-2200-1 (with 1/2" stud)
Note 2: Use DF-3300 Series Mounts for 4 1/2" hole centers (with 3/4" stud)
Note 3: Use DF-100 Mount for 1 7/8" minimum clearance
Note 4: DF-242 Series - Twin stud/double mount with 3/4" stud