R & D Marine Shear Loaded "Super Mounts", 5/8"

$131.51 to $276.92

$131.51 to $276.92

DESCRIPTION

R & D Marine Shear Loaded "Super Mounts", 5/8"

The R&D Engine Mounts are specifically designed for the rigors of marine, industrial, commercial and heavy equipment applications. We have mounts that have weight capacity ranging from 30-2,000 pounds per mount.

R&D Engine Mounts are pre-loaded to provide a dampening effect - both up and down. The R&D mounts are shear loaded to absorb forward and reverse thrust, yet soft enough to isolate engine vibrations from the surface they are mounted. To facilitate in the ease of installation, the mounts have nuts to adjust the height. The slotted holes in the base of the mount assist in alignment and installation.

To help increase the longevity of the mounts, all steel parts are zinc plated and passivated to limit corrosion. The threads of the stud are rolled and reduce the possibility of shearing the stud. This technology produces a significantly stronger thread than possible when the material is cut away in conventional cut-thread die methods. More specifically, the thread rolling (cold forming) process strengthens the thread in three ways: tension, shear, and fatigue resistance. The rubber component is covered by an oil shield to protect the rubber from petroleum based products.

R&D Engine Mounts are ideal for:

  • Generator Mounts
  • Industrial Engine Mounts
  • Commercial Engine Mounts
  • Heavy Equipment Engine Mounts

Designed For Any Type Of Engine

  • 2 & 3 cylinder long stroke
  • 1, 2 & 3 cylinder short stroke
  • High speed 4 cylinder, 6 cylinder and more

Standard sizes offer different weight capacity, footprint, stud size, and height. This enables direct plug-in replacement for most installations. Capacity from 30 - 2,000 lbs per mount.

Adjustable

R&D Marine Mounts are height adjustable. Slotted holes in base to assist in alignment.

Fail Safe Design

The vertical stud is secured to a horizontal metal plate, to prevent the mount from pulling apart. R&D Marine Engine Mounts will withstand a roll over test.

Great Vibration Isolation

Shear loaded mounts provide superior isolation and restrict fore an aft movement to maintain alignment. Compression mounts are available where there is a restriction on the available space.

The R&D Engine Mounts are specifically designed for the rigors of marine, industrial, commercial, and heavy equipment applications. These engine mounts are pre-loaded to provide a dampening effect when encountering upward or downward pressure. Most R&D mounts are shear loaded to absorb forward and reverse thrust, yet soft enough to isolate engine vibrations from the surface where they are mounted. To assist in the ease of installation, the mounts have nuts to adjust the height. The slotted holes in the base of the mount assist in alignment and installation. To help increase the longevity of the mounts, all steel parts are zinc plated and passivated to limit corrosion. The threads of the stud are rolled and reduce the possibility of shearing the stud. This technology produces a significantly stronger thread than possible when the material is cut away in conventional cut-thread die methods. More specifically, the thread rolling (cold forming) process strengthens the thread in three ways: tension, shear, and fatigue resistance. The rubber component is covered by an oil shield to protect the rubber from petroleum based products.

SPECS

Item #
MPN
Stud
Capacity Per Mount
Deflection
Adjustment Nut Thickness
Height Min - Max
Foot Print
C to C Distance
Mount Pre-Loaded
Engine HD Circular Shear Mount, 880-2,000 lbs, 3/4" Stud, 4" x 7" Base
Item #:533058-880-2000lbs
MPN:80-001-7
Stud: 3/4" UNF
Capacity Per Mount: 880 - 2,000 lbs
Deflection: 0.12" - 0.25"
Adjustment Nut Thickness: 0.63"
Height Min - Max: 4.04" - 7.22"
Foot Print: 4.00" x 6.88"
C to C Distance: 5.5"
Mount Pre-Loaded: 0.12"
Engine Shear Mount, 300-680 lbs, 5/8" Stud, 2.75" x 5" Base
Item #:533058-80-231lbs
MPN:80-001-4
Stud: 5/8" UNF
Capacity Per Mount: 300 - 680 lbs
Deflection: 0.09" - 0.21"
Adjustment Nut Thickness: 0.55"
Height Min - Max: 3.05" - 5.38"
Foot Print: 2.75" x 5.00"
C to C Distance: 4"
Mount Pre-Loaded: 0.09"
Engine Shear Mount, 80-230 lbs, 5/8" Stud, 2.75" x 5" Base
Item #:533058-80-230lbs
MPN:80-001-0
Stud: 5/8" UNF
Capacity Per Mount: 80 - 230 lbs
Deflection: 0.09" - 0.21"
Adjustment Nut Thickness: 0.55"
Height Min - Max: 3.05" - 5.38"
Foot Print: 2.75" x 5.00"
C to C Distance: 4.00"
Mount Pre-Loaded: 0.09"
Engine Shear Mount, 250-560 lbs, 5/8" Stud, 2.75" x 5" Base
Item #:533058-250-560lbs
MPN:80-001-2
Stud: 5/8" UNF
Capacity Per Mount: 250 - 560 lbs
Deflection: 0.09" - 0.21"
Adjustment Nut Thickness: 0.55"
Height Min - Max: 3.05" - 5.38"
Foot Print: 2.75" x 5.00"
C to C Distance: 4"
Mount Pre-Loaded: 0.09"
Engine Shear Mount, 120-410 lbs, 5/8" Stud, 2.75" x 5" Base
Item #:533058-120-410lbs
MPN:80-001-1
Stud: 5/8" UNF
Capacity Per Mount: 120 - 410 lbs
Deflection: 0.09" - 0.21"
Adjustment Nut Thickness: 0.55"
Height Min - Max: 3.05" - 5.38"
Foot Print: 2.75" x 5.00"
C to C Distance: 4.00"
Mount Pre-Loaded: 0.09"

RELATED ITEMS

PRODUCT REVIEWS

Ratings & Reviews

No reviews available

Be the first to Write a Review

PRODUCT FAQs

SHIPPING & RETURNS

Warranty:

  • The length of the warranty may vary by product, please refer to your product for the exact terms and conditions of the warranty for your purchase.

    Return:

  • Merchandise must be unused, in its original packaging and returned with a receipt within 30 days of purchase.
  • Full credit will be issued when the return is due to our error.
  • A restocking charge may apply to merchandise not shipped in error.
  • Concealed freight damage should be reported to the freight carrier immediately.
  • Manufacturer defects reported within 30 days of receipt will be supplied a pre-paid label for return shipping upon approval.
  • Please contact Go2marine LFS Marine and Outdoor for Manufacture Defects, Returns and help with Warranties.